Home › Courses · Français

Exam 1.1.1–1.3 · 3 h · pass mark 60%

RBQ Buildings exam 1.1.1 to 1.3

The Construction Code applied on site: building classification, foundations, wood framing, envelope, fire protection, stairs and guards. The Code’s exact values, with the section to look up.

One-time payment · 12-month access · no subscription

Course outline

Module 1Legislative and regulatory framework1 lessons · 7 questions
  1. Subclasses 1.1.1 to 1.3, the Code and the guarantee plan Free: read →
Module 2Building design1 lessons · 7 questions
  1. Area, height, occupancy and natural light
Module 3Excavation and building foundations1 lessons · 8 questions
  1. Footings, foundation walls, slabs and drainage
Module 4Building structure1 lessons · 7 questions
  1. Loads, wood framing and anchorage
Module 5Building envelope1 lessons · 7 questions
  1. Heat, air, vapour and water: the four controls
Module 6Fire protection and means of egress1 lessons · 7 questions
  1. Smoke alarms, fire separations and exits
Module 7Building mechanical systems1 lessons · 6 questions
  1. Ventilation, heating, plumbing and electrical: who does what
Module 8Architectural and functional components1 lessons · 10 questions
  1. Stairs, handrails and guards: the Code’s values
Module 9Renovation, alteration and sustainable development1 lessons · 6 questions
  1. Renovating existing buildings and building sustainably

The RBQ 1.1.1–1.3 exam at a glance

  • 3 hduration
  • 60%pass mark
  • A · B · C · Dmultiple choice, one correct answer
  • FR · ENyour choice of language
Free lesson

Subclasses 1.1.1 to 1.3, the Code and the guarantee plan

What each licence allows

SubclassWork allowed (RBQ competency profile)
1.1.1 New residential buildings covered by a guarantee plan, class IDetached, semi-detached or row single-family house (co-owned or not) and multi-family building from duplex to quintuplex not held in divided co-ownership.
1.1.2 Class IIMulti-family building held in divided co-ownership with at most 4 superimposed private portions (not counting parking and storage).
1.2 Small buildingsBuildings covered by Part 9 of the National Building Code (as adopted by Chapter I of the Construction Code) not covered by 1.1.1 and 1.1.2; and 1.1.1 and 1.1.2 buildings only as a subcontractor for a holder of those licences.
1.3 Buildings of all typesAny building, including those of 1.2.

These four subclasses also allow some specialty work (subclasses 2.6, 3.1, 4.1, 5.1 and 6.1 of Schedule II) on a building covered by the licence.

The Construction Code, Chapter I

It adopts the National Building Code of Canada 2015 (NBC), amended by Québec. Division A: objectives and compliance; Division B: technical requirements; Division C: administrative provisions. Part 9 (housing and small buildings) covers buildings of at most 3 storeys in building height and at most 600 m² in building area, for residential, business, mercantile and medium- or low-hazard industrial occupancies. Other buildings fall under Part 3 and Part 4 (structural design by an engineer).

The guarantee plan for new residential buildings

A contractor building covered new residential buildings (1.1.1, 1.1.2) must join the mandatory guarantee plan (Regulation respecting the guarantee plan for new residential buildings, B-1.1, r. 8). That is why licence security is not required when only subclasses 1.1.1 and 1.1.2 are requested (B-1.1, r. 9, s. 26).

Québec amends the NBC

Examples of Québec amendments: all concrete must be produced by a plant holding a BNQ certificate of conformity; each storey of a dwelling unit must have glazing providing natural light of at least 5% of its floor area (s. 9.7.2.3 added by Québec); piping for a future sub-floor depressurization system (radon) is required under floors-on-ground of conditioned spaces (s. 9.13.4.3).

Key points1.1.1: new houses and duplex to quintuplex (guarantee plan). 1.1.2: co-ownership, at most 4 superimposed private portions. 1.2: Part 9. 1.3: any building. Part 9: 3 storeys and 600 m² or less.

FAQ

How long is the RBQ 1.2 or 1.3 execution exam?

According to the RBQ information sheets (July 2025), the exams for subclasses 1.1.1, 1.2 and 1.3 last 3 hours, with a 60% pass mark, in French or English.

What is the difference between subclasses 1.1.1, 1.1.2, 1.2 and 1.3?

1.1.1: new residential buildings under the guarantee plan (houses, duplex to quintuplex not held in divided co-ownership). 1.1.2: new multi-family buildings in divided co-ownership with at most 4 superimposed private portions. 1.2: small buildings covered by Part 9 of the Code. 1.3: buildings of all types.

Does this course cover all four exams?

Yes: the RBQ publishes one competency profile shared by subclasses 1.1.1, 1.1.2, 1.2 and 1.3. Each subclass has its own exam, but the core material is the same. Some items (large buildings, Part 3) mainly concern 1.3.

Which code is the course based on?

The Québec Construction Code, Chapter I, Building, which adopts the National Building Code of Canada 2015 with Québec amendments. Where Québec changed a section, the course gives the Québec version.

Independent service, not affiliated with the Régie du bâtiment du Québec (RBQ). All questions are original: the RBQ’s official exams are confidential.